Перейти к содержимому
Hales Yeah 1/4-20 x 2-1/2 in Trailer Deck Screws, T30 Torx, (50 Pack)

Price:

$ 47,23


Hales Yeah 1/4-20 x 2-1/2 in Trailer Deck Screws, T30 Torx, (50 Pack)

https://m.media-amazon.com/images/I/81w4GJTZ6xL.jpg
15 sold in last 24 hours
  • Type F Thread-Cutting Design: Type F thread-cutting tip cuts threads into steel cross-members through a 7/32 in. pilot hole without requiring a separate tapping step; oil phosphate coating lubricates on contact to reduce drive effort and extend bit life during high-volume floorboard screw installation
  • Wide Trailer Compatibility: Compatible with flatbed, drop-deck, curtain-side, dry van, enclosed, utility, gooseneck, and horse/livestock trailers; suitable for apitong, hardwood, and softwood deck boards fastened to steel cross-member and C-channel frames
  • Flush Flathead Profile: Flathead profile sits flush with the deck surface with no raised head to snag straps, tarps, or pallet runners during cargo loading and unloading; essential for flatbed and enclosed trailer floor installations
  • Case-Hardened Carbon Steel Construction: Case-hardened carbon steel per SAE J933 with HRC 45 minimum surface hardness and 142 lb-in minimum torsional strength; black phosphate and oil finish for corrosion resistance; fully threaded UNC 1/4-20 right-hand shank for maximum holding strength in wood-to-metal trailer frame connections
  • Six-lobe Torx drive delivers higher torque transfer and lower cam-out rate than hex or Phillips, reducing bit wear and strip-out risk during production trailer floor screw installation

$ 47,23 47.23 USD $ 47,23

Not Available For Sale

($ 0,94 / Units)
7 people are viewing this right now

  • Производитель
  • Подсчет
  • Пункт Размеры L x W x H
  • Внешняя отделка
  • Металлический тип
  • Головной стиль
  • Охват нитями
  • Снаружи диаметр
  • бренд
  • Тип головы
  • UPC
  • Количество пунктов
  • Тип застежки
  • Пункт Диаметр
  • Количество кустов
  • Размер крепежа
  • Размер нити
  • Материал
  • цвет
  • Тип нити
  • Система привода
  • Идентификационный номер глобальной торговли
  • Количество пакетов
  • Назови имя
  • Часть номер
  • Модель
  • Тип материала
  • Стиль Thread
  • Класс Thread
  • Максимальная сила сдвига
  • Обсуждение Screw Thread Type
  • Финишные типы
  • Пункт Размеры
  • Тип продукта
  • Пункт Выделить
  • Имя размера
  • Винт голова стиль
  • Винтовка Point Style
  • Head Angle

Такой комбинации не существует.

самозарядные винты

Условия и положения
30-дневная гарантия возврата денег
Доставка: 2-3 рабочих дня

Estimated shipping
Select a product to estimate shipping.

Specifications: Trailer Deck Screws for Attaching Wood to Metal

Installation Process for Trailer Floorboard Screws

Floorboard Planning

Laying out a wooden flatbed for a trailer deck requires precision and planning to ensure a durable and functional surface.

Measure Your Trailer : Before purchasing or cutting any wood, measure the length and width of your trailer's bed.

Select Your Wood : Choose a wood type suitable for outdoor use and capable of withstanding the weight and type of cargo you plan to transport. Common choices include treated lumber or hardwoods like oak or apitong. Ensure the wood is straight and free of large defects.

Cut the Wood : Based on your measurements, cut the wood to the required length. If the trailer is wider than the width of one board, you'll need to lay boards side by side. Leave a small gap (about 1/8 inch) between each board to allow for wood expansion due to temperature changes and to prevent water from pooling on the deck.

Dry Fit the Deck Boards : Before securing the boards, lay them out on the trailer bed to ensure they fit properly. This is your chance to make any final adjustments or cuts. Ensure the boards are aligned and flush with the edges of the trailer. The ends of the boards should be supported by the crossmembers underneath.

Mark the Position of Crossmembers (if not visible) : If the trailer's crossmembers are not visible from above, mark their positions on the side of the trailer or directly on the boards after aligning them. This will guide you where to drill pilot holes and drive the deck screws.

Mark Out Pilot Hole Locations

Once the decking is in place, confirm the positions of the crossmembers and indicate with a marker where holes need to be drilled. Wherever the wood of the trailer deck intersects with a crossmember, designate two drilling points approximately 1" from each side of the plank.

Align with Structural Members : Align the holes with the underlying support members (studs, joists, or crossmembers) for maximum strength achieved.

Spacing for Multiple Trailer Floor Screws : Ensure the pilot holes are evenly spaced. This not only improves the appearance but also ensures the load is evenly distributed.

Marking the Locations : Use a pencil, marker, or a small punch to mark the location of each hole. This helps in drilling accurately and prevents the drill bit from wandering. For precision, use a ruler, tape measure, or a template to ensure the marks are correctly positioned.

Drill Pilot Holes Thru the Wood and Metal

Use a 7/32" drill bit to create a pilot hole (a pilot hole is a small-diameter hole that guides the trailer decking screws)

Secure the Material : Make sure the material you're drilling into is stable and secure. You might need to clamp it down or have someone hold it firmly to prevent it from moving.

Position the Drill : Place the tip of the drill bit on the mark you made. Hold the drill so that the bit is perpendicular to the material's surface.

Drill the Hole : Start the drill at a slow speed to establish the hole. Once the bit has begun to bite into the material, you can increase the speed. Apply steady pressure.

Go through wood and metal : The trailer deck screws will self tap in the pilot hole (remember, these are wood to metal self tapping screws)

Secure Installation and Flush Mount with Flathead Self Drilling Screws

With a T30 star bit, drive the trailer floorboard screws through the wood and into the metal crossmembers, positioning them slightly beneath the wood's surface to prevent any protrusions.

When installed correctly, these self drilling screws deliver the essential hold for the boards, ensuring that your floor stays firmly secured while in transit.

Product details

Trailer Deck Screws - 50 Pack T30 -9
Trailer Deck Screws - 50 Pack T30 -10
Trailer Deck Screws - 50 Pack T30 -11
Trailer Deck Screws - 50 Pack T30 -12
Main Specification
Материал Углеродистая сталь or HRC 45 Minimum or Meets SAE J933
Производитель Hales Corners Supply LLC
Подсчет 50 Граф
Пункт Размеры L x W x H 2.5 x 0,25 x 0,25 дюйма
Внешняя отделка Phosphate and Oil
Металлический тип Углеродистая сталь
Головной стиль Flat / Countersunk
Охват нитями Полностью измельченный
Снаружи диаметр 0,25 дюйма
бренд Hales Yeah!
Тип головы плоский
UPC 198168263310
Количество пунктов 50
Тип застежки Self-Tapping Screw Floor Board Screw
Пункт Диаметр 0,25 дюйма
Количество кустов 50
Размер крепежа 1/4-20 x 2-1/2 in
Размер нити 1/4-20
цвет черный
Тип нити Ун
Система привода Торкс
Идентификационный номер глобальной торговли 00198168263310
Product information
Назови имя 50 pieces or Thread Cutting Trailer Deck Screws 1/4-20 x 2-1/2 in
Количество пакетов 1 1
Technical Details
Тип материала Углеродистая сталь or HRC 45 Minimum or Meets SAE J933
Максимальная сила сдвига 000 psi or 80
Часть номер Trailer Deck Screws 1/4-20x2.5 50ct
Модель Trailer Floorboard Screws 1/4-20 x 2-1/2
Стиль Thread Правая рука
Класс Thread Стандарт
Обсуждение Screw Thread Type ККООН
Style
Финишные типы Oil Phosphate
Measurements
Пункт Размеры 2.5 x 0,25 x 0,25 дюйма
Others
Пункт Выделить Torx Drive Flathead Type F Thread-Cutting Wood to Metal Fasteners or Black Phosphate Carbon Steel or 7/32in Pilot Hole Required
Тип продукта самозарядные винты
Имя размера 1/4-20 x 2-1/2 in
Винт голова стиль Flat / Countersunk
Винтовка Point Style Type F Point
Head Angle 82 degrees