3" Powder Actuated Fasteners,.300 Head Diameter Drive Pin100pcs/pack
14 sold in last 24 hours
- Workable for all popular powder fastening systems and single pin Concrete Nailers
- Ballistic point and smooth shank makes the penetrating easier and lower defect rate
- Special treated pins are so tough they can penetrate dense concrete, masonry joint or structural quality steel. Plated surface makes the pins durable and suitable for treated lumber
- Pins measure 3/4 "-3 ". With a .300 " Head diameter, .145 " Shank diameter and .315 " diameter flute
- Particularly used for fastening wood to concrete, wood to steel, steel to concrete and steel to steel. 100pcs per box.
Estimated shipping
Select a product to estimate shipping.FVSCM 3/4"-3" Powder Actuated Fasteners
FVSCM 3/4"-3" Powder Actuated Fasteners,.300 Head Diameter Drive Pins with red flute
FVSCM 3/4-3" Powder Actuated Fasteners with Wahser
FVSCM 3/4-3" Powder Actuated Fasteners, Drive Pins with Wahser
FVSCM Powder Actuated Fasteners with Accessory
FVSCM Standard Powder Actuated Fasteners with Accessory(Angle Clip, Top Hat)
.22 Low Velocity Powder Actuated Tool w Silencer
FVSCM Low Velocity Powder Actuated Tool, 22 cal Single Shot with Silencer for wood/steel to steel/concrete/masory joint fastening
Low Velocity Powder Actuated Tool, .22 Single Shot
Low Velocity Powder Actuated Tool, 22 cal Single Shot for wood/steel to steel/concrete/masory joint fastening
.27 Low Velocity Powder Actuated Tool
Low Velocity Powder Actuated Tool .27 cal with built in power indicator
Special treated pins are so tough they can penetrate dense concrete, masonry joint or structural quality steel.
Powder Actuated Fasteners Specification
Fasten in concrete with 3" spacing between fastenings and edges. Penetrate 1" into concrete, with a thickness 3 times the embedment depth.
Fasten into steel, use a minimum 1-1/2" spacing and be 1/2" from edges. Length should fully penetrate for maximum hold. Steel 3/16"-5/16" thick.
For concrete: 3" spacing, 3" from edge, 1" embedment. Concrete should be 3 times embedment. depth. In masonry, use horizontal joints.
Fastening into steel: 1-1/2" spacing, 1/2" from edge. Fastener should penetrate completely. Steel thickness 3/16" to 5/16".
What does it mean about "LOW VELOCITY" on the package?
A power actuated tool functions much in the same way that a firearm works in that a small chemical propellant charge fires a PISTON which drives the fastener home. Most of these tools available in the United States today are considered LOW VELOCITY.
What kind of material does the Pin work with?
It works with most of the concrete and steels. However it does not work well with very hard materials, such as cast iron, hardened steels, rock, face brick, glazed tile, or glass block.
What about the package of Pins?
Ordinary package is 100(+_3)pcs/box. The box is taped for safe transport via courier. Some sizes are available in wholesale package.
How to use Powder actuated fasteners
This is showing how to use.
One must be licensed to use a powder actuated tool.
Product details
| Main Specification | |
|---|---|
| Ražotājs | FVSCM |
| Vienību skaits | 100 skaitīšana |
| Pin type | Drive |
| Ārpus Diametra | 0.3 inches |
| Zīmols | Fvscm |
| UPC | 671891650348 |
| Vienību skaits | 100 |
| Stiprinājuma tips | Powder |
| Vienības diametrs | 0.15 Inches |
| Gabalu skaits | 1 |
| Krāsa | Sarkans |
| Vienības svars | 6.8 g |
| Product information | |
| Uzstādīt nosaukumu | 3" Powder Actuated Fasteners |
| Technical Details | |
| Daļas numurs | P300 |
| Paraugs | P300 |
| Materiāla veids | Oglekļa tērauds |
| Savietojams Groove Diametrs | 0.15 inches |
| Style | |
| Apdares tipi | Zinc Chromate |
| Measurements | |
| Vienības izmēri | 3.94 x 3.15 x 2.76 inches |
| Others | |
| Produkta veids | Powder Actuated Fasteners |
| Izmērs Nosaukums | 3" |
| Skrūves galvas stils | Flat |