30A 360W 12V DC barošanas bloks, Universāla regulēta pārslēgšana AC 110V/220V uz līdzstrāvas pārveidotāju (SMPS) Transformatora draivera adapteris LED Strip Lights, CCTV kameru sistēmai, 3D printerim, radio, datora projektam
12 sold in last 24 hours
- 1.Stable 12V 30A 360W DC Izvade – Precīza un regulējama: Nodrošina regulētu DC 12V izvadi līdz 30A (360W max) ar ±10% regulējamu sprieguma diapazonu, kas piemērots dažādām ierīcēm. Konsekventai jaudas pārveidošanai no AC 110V/220V, nodrošinot vienmērīgu veiktspēju un samazinātu pulsāciju jutīgai elektronikai, piemēram, LED apgaismojumam, novērošanas kamerām un sakaru sistēmām.
- 2.Dual Sprieguma ieejas dizains – Viegla iestatīšana globālai lietošanai: Atbalsta AC 110V/115V vai 220V/230V ieeja. Sānu sprieguma selektora slēdzis ļauj manuāli izvēlēties pareizo iestatījumu pirms ieslēgšanas. ASV reģioniem, vienība ir iestatīts 110V ērtības. Plaša sprieguma saderība padara šo SMPS ideālu gan vietējiem, gan rūpnieciskajiem lietojumiem.
- 3. Droša, efektīva un uzticama veiktspēju: Built ar īssavienojumu, pārslodze, pārspriegums, un virstemperatūras aizsardzības, lai aizsargātu pievienoto aprīkojumu. Ierīko EMI/RFI filtru zemai trokšņa jaudai, metāla siltuma izkliedēšanas kameru uzlabotai dzesēšanai un 100 % pilnas slodzes piedeguma testēšanu, lai nodrošinātu ilglaicīgu lietošanu.
- 4.Versatile Applications Pāri vairākām ierīcēm: Universāls barošanas avots plašam DC sistēmu klāstam, ieskaitot LED slokšņu gaismas, CCTV kameras, 3D printerus, radio raidītājus, sakaru vadības sistēmas un rūpnieciskās automatizācijas projektus. Piemērots darbnīcām, laboratorijām un DIY elektronikai, kur nepieciešama stabila līdzstrāvas jauda.
- 5.Kvalitātes nodrošināšana un klientu atbalsts: Ražota ISO sertificētā rūpnīcā ar vairāk nekā 15 gadu pieredzi elektronikā. Mēs stāvam aiz katra produkta ar stingru kvalitātes kontroli un atsaucīgu tehnisko atbalstu. Jūsu apmierinātība ir garantēta – sazinieties ar mums jebkurā laikā profesionālai palīdzībai vai produktu nomaiņai, ja nepieciešams.
Estimated shipping
Select a product to estimate shipping.This 12V 30A 360W regulated switching power supply provides stable DC output for a variety of electronic and industrial applications. It efficiently converts AC 110V or 220V to DC 12V, delivering steady current and low ripple output. The durable perforated metal housing enhances cooling and ensures reliable long-term operation. Perfect for LED lighting, CCTV systems, 3D printers, communication devices, and DIY electronics.
Technical Specifications
- Input Voltage: AC 110V / 220V ±15%, 50/60Hz
- Output Voltage: DC 12V (adjustable ±10%)
- Maximum Output Current: 30A
- Rated Power: 360W
- Connection Terminals: +V x2, -V x2
- Operating Temperature: -15°C to +55°C
- Humidity Range: 10%–95% RH (non-condensing)
- Material: Galvanized metal shell with multiple ventilation holes for heat dissipation
- Certifications: CE / FCC / RoHS / CCC compliant
Performance and Safety
Equipped with short circuit, overload, over-voltage, and over-temperature protection to safeguard connected devices. Features a low noise EMI/RFI filter for stable output and full-load burn-in testing for quality assurance. The heavy-duty case minimizes temperature rise and improves durability. Consistent voltage is maintained during power-on and operation.
Important Usage and Safety Instructions
Please follow these guidelines carefully to ensure reliable and long-term performance of your 12V power supply.
1. Ventilation and Operating Conditions:Operate the unit in a dry, well-ventilated environment. Avoid sealed spaces or placing objects on top that could block airflow. Continuous heat buildup can reduce efficiency and shorten lifespan.
2. Voltage Configuration:The power supply is factory-set to 110V/115V for U.S. regions. If operating on 220V AC, move the selector switch to the correct position before powering on. Always verify input voltage to prevent internal component failure.
3. Load Management:For optimal efficiency, operate the device between 70–80% of its rated current. Overloading or prolonged use at full capacity may cause overheating or premature aging of internal parts.
4. Wiring and Grounding:Confirm that all terminals are securely connected and polarity is correct before applying power. Use appropriate cable thickness for your load. Proper grounding is required for electrical safety and noise suppression.
5. Maintenance and Inspection:Inspect the unit periodically. Clean vents with compressed air or a soft brush depending on the dust level in your environment—typically every 2–3 months. Check terminals for looseness or corrosion to maintain stable contact.
6. Environmental Cautions:Use indoors only, away from moisture, condensation, or high humidity areas. Do not install near water sources or in corrosive environments. In areas with unstable mains power, consider using a UPS or voltage stabilizer.
7. Radio Frequency Considerations:This unit includes an EMI/RFI filter to minimize interference. However, it is not intended for direct use with sensitive radio transmitters or amateur radio equipment where noise isolation is critical.
8. Safety Warnings:High voltage exists inside the housing—do not remove the cover or attempt to repair internally. If unusual sounds, heat, or odor occur, disconnect power immediately. Installation should be performed by a qualified electrician. The package does not include cables, switches, or screws; please prepare them as needed.
Application Fields
Ideal for powering LED strip lights, display signs, CCTV camera systems, 3D printers, automation controllers, and communication equipment. Suitable for both home and industrial environments requiring a stable 12V DC power source.
Quality and Service Commitment
Manufactured under strict quality control by a professional OEM factory with over 15 years of experience. Every unit is tested before shipment. We offer responsive technical support and customer satisfaction guarantee — delivering reliable performance and trusted service worldwide.
| Main Specification | |
|---|---|
| Ražotājs | GESD |
| Specifikācija atbilst | RoHS |
| Amperāža | 30 A |
| Izvades jauda | 360 vati |
| Izejas spriegums | 12 volti of direct current |
| Zīmols | GESD |
| UPC | 768432200107 791523250569 755454564928 |
| Vienību skaits | 1 |
| Ieplūdes spriegums | 220 volti of maiņstrāva |
| Izvades strāva | 30 A |
| Materiāli | Metāls |
| Krāsa | baltie |
| Formas koeficients | taisnstūra |
| Savienotāja tips | Skrūve |
| Product information | |
| Maksimālā jauda | 360 vati |
| Item details | |
| Parauga numurs | 12v 30a |
| Measurements | |
| Vienības izmēri | 4, 5 x 8, 5 x 1, 97 collas |
| Others | |
| Produkta veids | Enerģijas pārveidotāji |
| Novietnes materiāls | Metāls |
| Mfr daļas numurs | 12v 30a |
| Savienotāja tips, ko izmanto kabelī | skrūve |