The Hillman Group 44835 7/16-14 x 6-Inch Threaded Rod, 5-Pack
13 sold in last 24 hours
- THREADED ALONG ITS WHOLE LENGTH: This rod is threaded continuously from end to end, so a nut, coupler, or hanger can be fastened anywhere along it, making it ideal wherever tension loads are expected and a custom-length fastener is needed.
- CUT TO SIZE, TAKES NUTS AND COUPLERS: Run nuts, washers, and couplers on at any point, and cut the rod to length with a hacksaw for a custom fit; this piece measures 7/16-14 x 6 inch in a coarse thread that pairs with standard coarse hardware.
- ZINC-PLATED STEEL: Made from steel with a zinc plating, the rod offers moderate protection against rust and corrosion, so it holds its strength and threads cleanly for indoor use and covered outdoor jobs over the long term.
- PLUMBING, HVAC, AND HANGING: Ideal for hanging, connecting, clamping, and supporting in plumbing, heating, and air-conditioning work, and for mechanical, agricultural, and general fabrication wherever a threaded tension member is needed.
- TRUSTED HILLMAN QUALITY: Hillman supplies dependable threaded rod, studs, and fasteners that tradespeople and homeowners rely on every day. Keep an assortment on hand for hanging, clamping, and repair jobs around the home, shop, and site.
Estimated shipping
Select a product to estimate shipping.Hillman Threaded Rod is ideal for use wherever, and whenever, tension loads are expected and a fastener needs to be made to a custom length. The rod is threaded continuously along its entire length, so nuts, washers, couplers, and hangers can be fastened anywhere on it, which makes it one of the most versatile fasteners to keep on hand for building, hanging, and repair work. Because the thread runs the full length, the rod adapts to the job: run hardware on at any point, and cut the rod to the exact length you need with a hacksaw or rotary tool. This piece measures 7/16-14 x 6 inch in a coarse thread, and it pairs with standard coarse nuts, washers, and couplers for hanging, connecting, clamping, and support. Made from steel with a zinc plating, the rod offers moderate protection against rust and corrosion. That keeps its strength and lets its threads run cleanly for indoor use and covered outdoor jobs over the long term, so a suspended or clamped assembly stays secure rather than seizing or weakening where the load is carried. Use threaded rod for hanging, connecting, clamping, and supporting in plumbing, heating, and air-conditioning systems, and for mechanical, agricultural, and general fabrication projects. It is useful for a myriad of jobs from hanging light fixtures and pipe to building jigs and U-bolt assemblies. Keeping a few sizes on hand means the right rod is always ready.
Threaded Rods, also known as studs, are rods with continuous threading on both ends and no head or fashioned tip. They can be used as an anchor bolt, clamp, hanger or U-bolt. The threaded rod may extend along the complete length of the rod.
Hillman Solutions is a leading North American provider of hardware products, including home improvement products, protective and job site gear solutions including gloves and storage, and robotic technologies encompassing key duplication and accessories, engraving and knife sharpening. Hillman designs innovative products and merchandising solutions for complex categories. Founded in 1964 in Cincinnati, Ohio, Hillman believes that the building never stops.
| Main Specification | |
|---|---|
| Ražotājs | Hillman grupa |
| Vienību skaits | 5 Skaits |
| Ārējā apdare | Tērauda izstrādājumi |
| Pavedienu aptvērums | Pilnībā vītņots |
| Stiprinājuma materiāls | Alloy Steel |
| Ārpus Diametra | 0.44 Inches |
| Zīmols | Hillman |
| UPC | 008236782110 |
| Vienību skaits | 5 |
| Stiprinājuma tips | Pilnībā vītņots |
| Vienības diametrs | 0,44 collas |
| Pavediena izmērs | 7/16"-14 |
| Materiāli | tēraudu |
| Krāsa | Sudrabs |
| Pavediena tips | Un |
| Globālais tirdzniecības identifikācijas numurs | 00008236782110 |
| Vienības svars | 11.2 unces |
| Product information | |
| Uzstādīt nosaukumu | Iepakojums |
| Technical Details | |
| Daļas numurs | 44835 |
| Paraugs | 44835 |
| Materiāla veids | tēraudu |
| Pavedienu stils | Unified |
| Vienības cietība | B70 |
| Style | |
| Apdares tipi | Tērauda izstrādājumi |
| Measurements | |
| Vienības izmēri | 6.5 x 1.6 x 1.3 inches |
| Others | |
| Vienības izcelšana | HVAC or Sanitārtehniskie darbi or Sausais resistants or fixtures or Runs continuously end to end or cut to any size or takes nuts and couplers or clamping |
| Produkta veids | Fully Threaded Rods & Studs |
| Izmērs Nosaukums | 6 inches |
| Skrūves galvas stils | Plakans |
| Aparatūras materiāls | Leģētais tērauds |
| Nosacījuma veids | Grade B7 |